Replacing lifters is not an easy task, but with the right tools and some patience, it can be done. Lifters are a crucial part of your engine's valve train, and if they fail, it can cause severe damage to your engine. In this article, we will go through the steps involved in replacing lifters in your car.
Step 1: Gather the necessary tools
Before starting the replacement process, you need to gather all the necessary tools. The tools required for replacing lifters include a socket wrench set, a torque wrench, a pry bar, a camshaft removal tool, and a gasket scraper. Make sure you have all the required tools before starting the process.
Step 2: Disconnect the battery
Disconnect the battery before starting any work on your car. This will prevent any electrical accidents from occurring. Make sure the battery is disconnected before proceeding with the next step.
Step 3: Remove the valve cover
Remove the valve cover to access the lifters. The valve cover is usually held in place by bolts, which can be removed using the socket wrench set. Once the bolts are removed, you can lift the valve cover off the engine.
Step 4: Remove the rocker arms
Remove the rocker arms using the pry bar. The rocker arms are usually held in place by bolts, which can be removed using the socket wrench set. Once the bolts are removed, you can lift the rocker arms off the engine.
Step 5: Remove the pushrods
Remove the pushrods using your hands. The pushrods are usually held in place by clips, which can be removed using your fingers. Once the clips are removed, you can lift the pushrods off the engine.
Step 6: Remove the lifters
Remove the lifters using the camshaft removal tool. The lifters are usually held in place by clips, which can be removed using the camshaft removal tool. Once the clips are removed, you can lift the lifters off the engine.
Step 7: Install the new lifters
Install the new lifters in the same position as the old ones. Make sure the lifters are properly seated in the engine. Once the new lifters are installed, you can proceed with the next step.
Step 8: Install the pushrods
Install the pushrods in the same position as the old ones. Make sure the pushrods are properly seated in the engine. Once the new lifters are installed, you can proceed with the next step.
Step 9: Install the rocker arms
Install the rocker arms in the same position as the old ones. Make sure the rocker arms are properly seated in the engine. Once the new lifters are installed, you can proceed with the next step.
Step 10: Reinstall the valve cover
Reinstall the valve cover using the bolts. Make sure the bolts are properly tightened using the torque wrench. Once the valve cover is reinstalled, you can reconnect the battery and start the engine to check if everything is working correctly.