As a senior car enthusiast, I have come across many types of distributors over the years. One of the most popular distributors out there is the Holley Sniper distributor. The Holley Sniper distributor is a high-performance distributor that is designed to work with Holley Sniper EFI systems. In this article, I will be discussing the Holley Sniper distributor wiring and how to properly wire it to your EFI system.
What is a Distributor?
Before we dive into the Holley Sniper distributor wiring, let's first understand what a distributor is. A distributor is a device that is used in internal combustion engines to route high voltage from the ignition coil to the spark plugs in the correct firing order. The distributor's job is to send the spark to the correct cylinder at the correct time.
Holley Sniper Distributor Wiring
The Holley Sniper distributor is designed to work with Holley Sniper EFI systems. The wiring for the Holley Sniper distributor is relatively simple. The distributor has three wires that need to be connected to the EFI system. These wires are the power wire, ground wire, and the signal wire.The power wire is connected to a switched 12-volt source. This wire provides power to the distributor. The ground wire is connected to a good chassis ground. This wire provides a ground for the distributor. The signal wire is connected to the EFI system. This wire sends a signal to the EFI system to let it know when to fire the spark plug.
Wiring the Power Wire
The power wire for the Holley Sniper distributor needs to be connected to a switched 12-volt source. This wire should be connected to a source that is only on when the ignition is on. The power wire should be a 16-gauge wire and should be properly fused. It is recommended to connect the power wire to the EFI system's main power source.
The ground wire for the Holley Sniper distributor needs to be connected to a good chassis ground. This wire should be a 16-gauge wire and should be properly grounded. It is recommended to ground the wire directly to the engine block or the chassis.
Wiring the Signal Wire
The signal wire for the Holley Sniper distributor needs to be connected to the EFI system. This wire sends a signal to the EFI system to let it know when to fire the spark plug. The signal wire should be a 20-gauge wire and should be properly connected. It is recommended to connect the signal wire to the EFI system's ignition output.
Conclusion
The Holley Sniper distributor wiring is relatively simple. The distributor has three wires that need to be connected to the EFI system. These wires are the power wire, ground wire, and the signal wire. The power wire is connected to a switched 12-volt source, the ground wire is connected to a good chassis ground, and the signal wire is connected to the EFI system. By properly wiring your Holley Sniper distributor, you can ensure that your engine is running smoothly and efficiently.